How to add a udev rule to beaglebone ??

Asked by 4 months ago
Hi, I am using beaglebone black running on stock Angstrom linux. I would like to add the following udev rule. SUBSYSTEM=="usb", ATTR{idVendor}=="24e0", MODE="0666" The above rule should give read/write privileges to USB devices. I have added the rule to the rules.d folder in etc folder and lib folder, but I am not sure which one is to be used. Also how the rules are not getting applied. Could anyone explain why this is happening. thanks

Your Answer

Name:
Reply:

All Answers

Answer by 4 months ago
From: arunbarnabasjohn [ at ] gmail.com Reply-To: beagleboard [ at ] googlegroups.com Date: Saturday, December 21, 2013 at 11:31 AM To: beagleboard [ at ] googlegroups.com Subject: [beagleboard] How to add a udev rule to beaglebone ?? First, you should never give RW permissions to everyone, so I would suggest MODE=³0660² and then add a USB group and add yourself to that group. Something like this: sudo groupadd f usb sudo gpasswd a <yourUserID> usb Now the rule becomes: SUBSYSTEM=="usb", ATTR{idVendor}=="24e0", MODE=³0660² GROUP==³usb" The rule is place in the /etc/init.d/rules.d folder. Use a name like "99-usb.rules² so that it is the last rule to execute. After you plugin your USB, run the following command: dmesg This will show you info about the usb device. You can also use the following command: lshw or lsusb This will show you info about your USB device that you will need in your rule. Regards, John